| 要二仓.地浸砂岩型铀矿致密泥岩
齿形复合片钻头的研究与应用[J].地质与勘探,2011,47(2):316-322 |
| 地浸砂岩型铀矿致密泥岩
齿形复合片钻头的研究与应用 |
| Research and Application of Serrate Composite Bits to Drilling at DenseMudstone in Uranium Deposits of Disseminated Sandstone type |
| 投稿时间：2010-05-20 修订日期：2010-11-20 |
| DOI： |
| 中文关键词: 致密泥岩 钻进效率 齿形复合片钻头 |
| 英文关键词: dense mudstone,drilling efficiency, serrate composite bits |
| 基金项目:中国核工业地质局“地浸砂岩型铀矿硬致密泥岩地层钻头的研究与应用冶生产中科研项目(编号DK2009)。 |
|
| 摘要点击次数: 2436 |
| 全文下载次数: 1523 |
| 中文摘要: |
| [摘要]针对地浸砂岩型铀矿钻探中致密泥岩钻进效率低的问题,在内蒙古巴音戈壁盆地研究试
验了齿形复合片钻头与圆片状复合片钻头,提高了钻进效率。对研磨性较弱,中等硬度致密泥岩,采用
椎104 mm 双环式齿形复合片钻头(六组)的钻进效率达到2. 60 m/ h,比普通复合片钻头提高73%;采用
椎110 mm 双环式平底齿形复合片钻头(四组)的钻进效率达到2. 58 m/ h,比普通复合片钻头提高27%。
对研磨性较强,硬致密泥岩,采用椎110 mm 双环式阶梯齿形复合片钻头(八组) 的钻进效率达到3. 31
m/ h,比普通复合片钻头提高25%;椎110 mm 双环式平底齿形复合片钻头(八组) 的钻进效率达到4. 38
m/ h,比普通复合片钻头提高20%。 |
| 英文摘要: |
| Abstract: To solve the problem of low drilling effeciency at dense mudstone in uranium deposits of disseminated sandstone type, we have conducted
in situ tests of the serrate and circular-plate composite bits in the Bayingebi basin of Inner Mongolia. For the dense mudstone of weak abrasive resistance
and intermediate hardness, we employed 椎104mm double-ring serrate composite bits (six sets), yielding a drilling rate 2. 60m/ h, enhancement of 73%
compared with common composite bits. When we used 椎110mm double-ring serrate composite bits with a flat bottom (four sets), the drilling rate
reached 2. 58m/ h, increased by 27% compared with general ones. For the dense mudstone of relatively strong abrasive resistance and big hardness, we
utilized 椎110mm serrate composite bits of double-ring and step style (eight sets) to obtain a drilling rate 3. 31m/ h, an increase of 25% than usual. And
the drilling rate of the 椎110mm serrate composite bits of double-ring and flat bottom style (eight sets) was as high as 4. 38m/ h, enhanced by 20% in
comparison with general composite bits. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
