| 赵婕.用空隙法识别矿化强度[J].地质与勘探,2010,46(4): |
| 用空隙法识别矿化强度 |
| Identification of Mineralization Intensity Using Lacunarity Analysis |
| 投稿时间：2010-03-24 修订日期：2010-06-08 |
| DOI： |
| 中文关键词: 空隙值 聚集分布 胶东 |
| 英文关键词: lacunarity,clumped distribution,eastern Shandong province |
| 基金项目:国家自然科学基金项目(编号:40572063),教育部跨世纪人才培养计划、111 工程(编号:B07011),高校长江学者和创新团队
发展计划(PCSIRT)和中国地质大学(北京)大学生学术科技学术基金资助。 |
|
| 摘要点击次数: 2195 |
| 全文下载次数: 1509 |
| 中文摘要: |
| [摘要]勘探槽中的矿化强度是由矿体品位分布决定,特别是高品位的积聚可以由空隙法量化显
示。本文以中国山东省胶东金矿区上庄金矿为例,运用空隙法判定矿体的矿化强度,讨论各勘探槽矿化
品位的空间分布。研究结果表明低空隙值一般反映大致均一的品位分布,而高空隙值则与大于边界品
位的高品位值密切相关,同时,高空隙值的分布一般反映出的是发育较好的矿体,而反之,低空隙值的分
布则反映出的是低品位的矿体或者是非矿体。一般来说,空隙值能反映出高品位空间积聚的程度,所以
能够作为评价矿体矿化强度的一个潜力指标。且与传统矿化强度判别方法相比,空隙法除了能反映矿
化强度以外,对矿体的空间分布也能如实呈现。 |
| 英文摘要: |
| Abstract:The mineralization intensity in the exploration trench is determined by the distribution of the grades,especially the clumpness of the high
grades of ore bodies,which can be quantified by the lacunarity method. Taking the Shangzhuang gold ore deposit in the gold mine area in eastern Shandong
Province as an example,using the lacunarity method,the spatial distribution of grades in different trenches is studied. The result shows that the low lacunar鄄
ity value usually reflects a nearly uniform distribution of the grades,whereas the high lacunarity value is associated with a clumped distribution of the high
grades beyond the cut-off corresponding to the well developed orebody. The values of the lacunarity generally reflect the degree of the spatial concentration
of the high grades and can serve as a potential index for appraisal of the mineralization intensity. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
