| 乌效鸣,李粮纲.用分段定向钻进方法铺设弧形轨迹集束管[J].地质与勘探,2000,(2):53- |
| 用分段定向钻进方法铺设弧形轨迹集束管 |
| NO-DIG PAYING BUNDLES OF PIPE IN CURVE TRAIL BY GUIDE DRILLING SECTION BY SECTION |
| |
| DOI： |
| 中文关键词: 定向钻进 轨迹 调整 集束管 高速公路 路基 |
| 英文关键词: guide drilling, trail, adjust, bundle of pipes, |
| 基金项目: |
| 乌效鸣 李粮纲 |
| 中国地质大学工程学院!武汉430074 |
| 摘要点击次数: 1919 |
| 全文下载次数: 1250 |
| 中文摘要: |
| 横穿开洛高速公路６５．４ｍ，贯通９个收费亭人井，１１段路基，按路面形状成中间高，两端低的菜钻孔；多级扩孔至孔径５００ｍｍ，在其中铺设Х１１４ｍｍ钢管４根，Х６０ｍｍ钢管３根。两组这样的管束平行间距始终保持４５０ｍｍ，按轨迹设计要求，准确无误的到达出口。 |
| 英文摘要: |
| Through the Kai-Luo highway whose width is 64.5 m, nine work wells and eleven road bases, the holes are drilled. Base on the shape of the road surface, the trail of drilling hole is curve . Its ends are lower and the middle part is higher. Then the diameter of holes is extended to 500mm step by step. Four pipes of 114 mm and three pipes of 60 mm are laid. The distance between the two bundles of pipe is 450 mm and it satisfies the request of the design. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
