| 刘一波,屠厚泽.聚晶立方氮化硼（PCBN）性能与平均自由程关系的研究[J].地质与勘探,1998,(3):29- |
| 聚晶立方氮化硼（PCBN）性能与平均自由程关系的研究 |
| STUDY ON THE RELATIONS OF PROPERTIES AND MEAN FREE PATH OF PCBN |
| |
| DOI： |
| 中文关键词: 聚晶立方氮化硼 刀具材料 性能 强度 耐磨性 |
| 英文关键词: PCBN,cutting materials,mean free path,property,strength,abrasion resistance |
| 基金项目: |
| 刘一波 屠厚泽 |
| [1]冶金部钢铁研究总院 [2]中国地质大学 |
| 摘要点击次数: 1499 |
| 全文下载次数: 1265 |
| 中文摘要: |
| 根据Ｇｏｒｌａｎｄ强度理论中平均自由程与材料性能的关系，通过一系列的试验和回归分析，研究了ＰＣＢＮ的内部结构，成份组成与其抗压强度的磨耗比之间的关系，建立了ＣＢＮ粒度、结合剂掺入量与ＰＣＢＮ平均自由程、抗压强度、耐磨性之间的关系式，对提高ＰＣＢＮ的性能具有重要的指导价值。 |
| 英文摘要: |
| PCBN cutter will meet great cutting force and heat impact when it's used to cut the hard and tough ferrous materials.The relationships of the compressing strength and abrasion resistance of PCBN and the mean free path of CBN particles in it's microstructure were studied.The results showed the properties of PCBN were improved with the increasing of mean free path in the case of low content of dopant, decreased with the increasing of the mean free path in the case of high content of dopant.There is an appropriate range of the mean free path in which the best properties are obtained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
